Based on Dantabrom chemistry, these tabs provide a concentrated source of active bromine that is ideal for hot tub sanitizing. These tablets dissolve slowly and evenly and fit in most spa feeders and floaters to provide continuous disinfection of your spa. 

Advantage:
Unique chemistry provides the effectiveness of chlorine without the chlorine odor.
The low-dusting tablet shape fits most floating feeders to create a bromine residual quickly.

Features:

• Contain 10% more active sanitizer than BCDMH.
• Brom Tabs are 2.5 times more soluble than BCDMH which is ideal for floating spa feeders.
• Creates a faster bromine residual for spa startup.
• Brom Tabs utilize Dantabrom chemistry which creates a better dissolution rate in a floating feeder.

Applications:
Before Use:
Before using this product in your spa or hot tub for the first time, add 1/2 ounce of sodium bromide per 100 gallons of water to establish a 30 ppm bromide concentration. Also, add sodium bromide at this dosage whenever the spa or hot tub is drained and refilled. The bromide addition ensures immediate establishment of an all-bromide system, eliminates chlorinous odors and maximizes skin and eye comfort.

Spa or Hot Tub Start-Up:
Using a suitable feeder adjusted according to the manufacturer’s directions, add this product to maintain an active bromine concentration of 2 to 4 ppm in residential spas and 3 – 6 ppm in commercial spas. Use a reliable test kit to monitor bromine regularly. This product’s usage will typically vary from 0.015 to 0.10 pound for every 300 gallons of spa water to maintain the recommended bromine concentration range. The presence of organic debris, high bather use and other factors may require a higher dosage.

Superoxidation:
Water soluble, non-filerable wastes can accumulate in spa water and cause dull or cloudy water and can stimulate algal growth. Superoxidation or superchlorination with a suitable oxidizing shock treatment should be done on a regular basis to remove these wastes and maintaing clear, sparkling water. Suitable oxidizing agents are those based on calcium hypochlorite, lithium hypochlorite, sodium hypochlorite or potassium peroxymonoperfulfate. Do not mix this product in concentrated form with any other chemicals. Do not add otehr chemicals to the feeding device when using this product.

Sizes:
1.5 lbs.
4 lbs.

Tips:
Proper sanitary practices require changing spa water every three months per the Simple Spa Care® Program. Maintain a sanitizer level of 3-5 ppm.

The post Leisure Time Brom Tabs (4lb) appeared first on Artesianspapart.

Renew is a non-chlorine shock oxidizer. This fast-dissolving granular rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.

When Renew is added to the spa water, it reacts with the bromide and forms a bromine solution to destroy any microorganisms left behind by the bather. Part of the Reserve & Renew® Chlorine-Free Sanitizing System.  

Advantage:
By adding Renew after spa use, the bather is not exposed to any sanitizer while in the water.
Use after each use as part of the Simple Spa Care® Program.

Features:

• Quickly dissolves in water to rid spa water of oils and residue.
• Eliminates organic materials that cause odors, skin and eye irritation.
• Use spa minutes after application.
• pH buffered so it does not effect pH level.
• Buffer potassium monopersulfate compound
• Formulated with DuPont™ Oxone®
• Allows for use immediately after application

Applications:
After Each Use:
1. Turn on filtration system.
2. For each 250 gallons of water, add 2 ounces directly into spa water.
3. Run filtration system for 15 minutes with cover off.
4. Repeat process once a week to help maintain clear, odor-free water.

Tips:
The time to add Renew is after using the spa. Simply add the required dose, put the cover in place, and the water will be fresh, clean and ready for the next bather.

Compatible With:
Chlorine, bromine, ozone and mineral purifications systems, as well as the Reserve & Renew® System.

The post Leisure Time Renew Bromine Shock (2.2lbs) appeared first on Artesianspapart.

Renew is a non-chlorine shock oxidizer. This fast-dissolving granular rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.

When Renew is added to the spa water, it reacts with the bromide and forms a bromine solution to destroy any microorganisms left behind by the bather. Part of the Reserve & Renew® Chlorine-Free Sanitizing System.  

Advantage:
By adding Renew after spa use, the bather is not exposed to any sanitizer while in the water.
Use after each use as part of the Simple Spa Care® Program.

Features:

• Quickly dissolves in water to rid spa water of oils and residue.
• Eliminates organic materials that cause odors, skin and eye irritation.
• Use spa minutes after application.
• pH buffered so it does not effect pH level.
• Buffer potassium monopersulfate compound
• Formulated with DuPont™ Oxone®
• Allows for use immediately after application

Applications:
After Each Use:
1. Turn on filtration system.
2. For each 250 gallons of water, add 2 ounces directly into spa water.
3. Run filtration system for 15 minutes with cover off.
4. Repeat process once a week to help maintain clear, odor-free water.

Tips:
The time to add Renew is after using the spa. Simply add the required dose, put the cover in place, and the water will be fresh, clean and ready for the next bather.

Compatible With:
Chlorine, bromine, ozone and mineral purifications systems, as well as the Reserve & Renew® System.

The post Leisure Time Renew Bromine Shock (5 lbs) appeared first on Artesianspapart.

Based on Dantabrom chemistry, these tabs provide a concentrated source of active bromine that is ideal for hot tub sanitizing. These tablets dissolve slowly and evenly and fit in most spa feeders and floaters to provide continuous disinfection of your spa. 

Advantage:
Unique chemistry provides the effectiveness of chlorine without the chlorine odor.
The low-dusting tablet shape fits most floating feeders to create a bromine residual quickly.

Features:

• Contain 10% more active sanitizer than BCDMH.
• Brom Tabs are 2.5 times more soluble than BCDMH which is ideal for floating spa feeders.
• Creates a faster bromine residual for spa startup.
• Brom Tabs utilize Dantabrom chemistry which creates a better dissolution rate in a floating feeder.

Applications:
Before Use:
Before using this product in your spa or hot tub for the first time, add 1/2 ounce of sodium bromide per 100 gallons of water to establish a 30 ppm bromide concentration. Also, add sodium bromide at this dosage whenever the spa or hot tub is drained and refilled. The bromide addition ensures immediate establishment of an all-bromide system, eliminates chlorinous odors and maximizes skin and eye comfort.

Spa or Hot Tub Start-Up:
Using a suitable feeder adjusted according to the manufacturer’s directions, add this product to maintain an active bromine concentration of 2 to 4 ppm in residential spas and 3 – 6 ppm in commercial spas. Use a reliable test kit to monitor bromine regularly. This product’s usage will typically vary from 0.015 to 0.10 pound for every 300 gallons of spa water to maintain the recommended bromine concentration range. The presence of organic debris, high bather use and other factors may require a higher dosage.

Superoxidation:
Water soluble, non-filerable wastes can accumulate in spa water and cause dull or cloudy water and can stimulate algal growth. Superoxidation or superchlorination with a suitable oxidizing shock treatment should be done on a regular basis to remove these wastes and maintaing clear, sparkling water. Suitable oxidizing agents are those based on calcium hypochlorite, lithium hypochlorite, sodium hypochlorite or potassium peroxymonoperfulfate. Do not mix this product in concentrated form with any other chemicals. Do not add otehr chemicals to the feeding device when using this product.

Sizes:
1.5 lbs.
4 lbs.

Tips:
Proper sanitary practices require changing spa water every three months per the Simple Spa Care® Program. Maintain a sanitizer level of 3-5 ppm.

The post Leisure Time Brom Tabs (1.5lbs) appeared first on Artesianspapart.

Especially designed to prevent scale formation in spas and hot tubs.  

Advantage:
Use as part of the Simple Spa Care Program

Features:

• Prevents scale formation
• Aids in the removal of exisiting scale
• Prevents dissolved solids from separting into spa and hot tub water

Applications:
Weekly:
1. Add directly to spa. Use 2 oz. for spas up to 800 gallons. Use 4 oz. for spas over 800 gallons.
2. Run filtration system for one hour, or normal filter cycle.

Tips:
Control of calcium can be very challenging, especially in spas. Regular use of Defender will prevent mineral buildup from occurring and causing the spa’s heater or equipment to fail. Use as a follow-up to Metal Gon, applied at start-up.

Compatible With:
Chlorine, bromine, ozone and biguanide sanitizers.

The post Leisure Time Defender appeared first on Artesianspapart.

This dual-action formula prevents unsightly water line film as well as stain and scale from forming around the perimeter of the spa. 

Features:

• Contains a sequestering agent to prevent stain and scale.

Applications:

Start-Up:
Add this product before adding BOOST or FREE. 1. With circulation pump ON and blowers turned OFF, add 1.5 oz. of CONTROL per 150 gallons of water directly to the spa. 2. Circulate the water on high speed for 15 minutes.

Weekly:
Add this product before adding BOOST or FREE. 1. With circulation pump ON and blowers OFF, add 3/4 oz. of CONTROL per 150 gallons of water directly to the spa. 2. Circulate water on high speed for 15 minutes. 3. Test spa water once a week with Leisure Time Spa & Hot Tub Test Strips. Maintain proper FREE, pH, total alkalinity and calcium hardness levels.

Sizes:
32 oz.

Compatible With:
Control is compatible with the Leisure Time Simple Spa Care specialty line of products.

The post Leisure Time Control appeared first on Artesianspapart.

Developed especially for hot water treatment, this clarifier utilizes unique polymer action that neutralizes and removes dirt, soap, oily films and suspended particles for clean, fresh water. 

Advantage:
Works quickly to turn cloudy water into crystal clear water.

Regular use ensures the filter will remove the maximum amount of particles from the water thus providing the best water clarity.

Features:

• Adds sparkle to spa water
• Helps spa filter perform at peak efficiency
• Reduces sanitizer demand by removing dirt particles
• No waiting after treatment

Applications:

Weekly:
1. Turn OFF all equipment.
2. Turn ON air blower or spa jets.
3. Add Bright & Clear directly to spa. Use 2 oz. for spas up to 800 gallons. Use 4 oz. for spas over 800 gallons.
4. Allow blower or jets to run a few minutes.
5. Turn ON filter system until water is bright and clear.

Tips:
Use weekly as a part of the Simple Spa Care® Program

Compatible With:
Chlorine, bromine, ozone and biguanide sanitizers.

The post Leisure Time Bright & Clear appeared first on Artesianspapart.

Granular product adjusts water pH and alkalinity down. Provides a greater amount of control for large and commercial spas.  

Advantage:
Use as part of the Simple Spa Care® Program

Features:

• Lowers pH and total alkalinity
• Increases effectiveness of sanitizer

Applications:
As Needed:
1. Make sure all equipment is OFF.
2. Add 1/4 oz. (1-1/2 tsp.) to the spa water.
3. Turn on circulation system for 30 minutes.
4. Retest water. If pH is still above 7.8, repeat steps 1-3.

Tips:
For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water.
It is important to maintain the pH between 7.2-7.8. High pH (above 7.8) can cause scaling and/or cloudy or colored water.

Compatible With:
Chlorine, bromine and biguanide sanitizers.

The post Leisure Time Spa Down appeared first on Artesianspapart.

pH Balance is a unique pH balancer that maintains the ideal pH level between 7.2 and 7.8.  

Advantage:
Due to the unique buffering capacity, it is not necessary to adjust the calcium level in the spa.

Features:

• Prevents pH drift
• Eliminates need to adjust pH on ongoing basis
• Use each time water is refilled
• One bottle treats up to 500 gallons of water

Applications:
As Needed:
1. Adjust pH and total alkalinity of freshly filled spa to proper levels. (pH level: 7.2 – 7.8 ppm total alkalinity level: 80-120 ppm)
2. Add entire bottle to filled spa while the filter is running.
3. pH will instantly increase or decrease to a reading between the ideal range of 7.2 to 7.8.

Tips:
Add to freshly filled water. pH Balance should not be used in hard water areas where calcium reading is above 150 ppm. In these conditions, this formula will soften hard water and release calcium into spa water possibly causing cloudy water, scaling and clogging of spa filter. If you are not in a hard water area, but experience clouding of spa water after applying pH Balance, Leisure Time recommends using Bright & Clear to return clarity to water.

Compatible With:
Chlorine, bromine, ozone and mineral purification systems.

The post Leisure Time pH Balance appeared first on Artesianspapart.